Re: [load balancing] Radware serial port connection

From: Ed Toro <cojonesdetoro [izzat] gmail.com>
Date: Tue Nov 20 2007 - 22:42:50 EST

Are you using a known good cable? Mayve the pinouts are all wrong. Try a
null modem adaper. It swaps pins 2,3 to 3,2

Steve Zohn wrote:
> I have an older radware linkproof that is currently live and working.
> However I can no longer will connect via the configware utility, I get a
> device times out. I've hooked up a serial port to the device and tried
> to connect using hyperterminal, but am not getting any response (even
> after cycling the power). I'm using a standard serial cable which works
> fine connecting to other devices and have adjusted the hyperterminal
> settings according to the docs.
>
> Are there any tricks to getting a connection? Also, is there away to
> reset the password after I do get connected.
>
> Thanks,
> Steve
> _______________________________________________
> lb-l mailing list
> lb-l@vegan.net
> http://vegan.net/mailman/listinfo/lb-l
> Searchable Archive: http://vegan.net/lb/archive
> http://lbdigest.com Load Balancing Digest
>
>

_______________________________________________
lb-l mailing list
lb-l@vegan.net
http://vegan.net/mailman/listinfo/lb-l
Searchable Archive: http://vegan.net/lb/archive
http://lbdigest.com Load Balancing Digest
Received on Tue Nov 20 22:44:03 2007

This archive was generated by hypermail 2.1.8 : Tue Nov 20 2007 - 22:44:03 EST