I am on 5.0 build 5 and the oid in Tony's page does not get an interger
(that is what MRTG says...)
Name: CSS 11150 SW Version: 5.00 Build 5
HW Major Version: 01 HW Minor Version: 0
-----Original Message-----
From: Stephane LITKOWSKI [mailto:st_litkowskiIZZAThotmail.com]
Sent: Wednesday, July 25, 2001 9:37 PM
To: lb-lIZZATvegan.net
Subject: Re: [load balancing] CS11800 & SNMP
OIDs are the same for all CSS (50,150 or 800).
The problem is the WebNS version (MIBs are same for all versions, but some
objetcs are not implemented). Connections / sec are not implemented before
v4.0.
----- Original Message -----
From: Cihan <mailto:CihanSIZZATgaranti.com.tr> Subasi (Garanti Teknoloji)
To: 'lb-lIZZATvegan.net' <mailto:'lb-lIZZATvegan.net'>
Sent: Wednesday, July 25, 2001 1:12 PM
Subject: RE: [load balancing] CS11800 & SNMP
Can someone send me the OIDs for CSS11150? Thanks...Tony I checked the
connections/sec configuration example for Arrowpoint but did not work for my
CSS11150...Could it be because that was experimental....
-----Original Message-----
From: tony bourke [ mailto:tonyIZZATvegan.net <mailto:tonyIZZATvegan.net> ]
Sent: Friday, June 15, 2001 5:24 PM
To: lb-lIZZATvegan.net
Subject: Re: [load balancing] CS11800 & SNMP
Never one to back down from shamless self-promotion:
http://vegan.net/MRTG <http://vegan.net/MRTG>
Some of the thigns you mentioned are covered in the arrowpoint config (CSS
11000s used to be called ArrowPoint)
Hope that helps.
Tony
On Fri, 15 Jun 2001,
Stephane LITKOWSKI wrote:
> I want to monitor via SNMP these things :
> - CPU
> - number of TCP per sec on a port
> - number of free FCBs per FPP
> - number of allocated FCBs per FPP
>
> but I just find in the MIB, the CPU variable.
>
> I have two CS11800, one in version 4.01 build 19 and the other in version
3.10 build 75.
>
> Could anyone help me ?
>
>
> Stephane
>
>
-- -------------- -- ---- ---- --- - - - - - -- - - - - - - Tony Bourke tonyIZZATvegan.net
This archive was generated by hypermail 2b30 : Thu Jul 26 2001 - 02:19:02 EDT