From: tony bourke (tonyIZZATvegan.net)
Date: Fri Mar 21 2003 - 05:05:33 EST
Also,
If you're using the Alteon as a default gateway, on a one-armed network,
with the VIPs and the real servers on the same subnet, make sure you've
got "submac" disabled. The symptoms you've described can be similiar to
that of a submac problem.
Tony
On Thu, 20 Mar 2003, Jose Jaime Meseguer Navarro wrote:
> Hi
> We have a mid-large network, and we bought some time ago an Alteon AD3 for load
> balancing our servers, as the traffic was increasing.
> We have successfully configured the load balancer for two servers using three
> ports, as the example in the manual explains: two for the servers and one for
> the clients.
> But we want to configure it to use just one port for both servers and clients.
> If we do it by enabling client and server processing on the port, it works (it
> does load balance), but it is slooooow, taking minutes to load a single html
> page.
> In the manual, it says it can handle both client and servers on one port. What
> else do we have to configure?
> Thanks,
>
> Jose Jaime
>
> --
> _____________________________________________________
>
> Jose Jaime Meseguer Navarro
> Sección de Redes y Comunicaciones - ATICA
> Universidad de Murcia - http://www.um.es/atica
>
> Edificio D, Campus Universitario de Espinardo
> C.P. 30100 Murcia
> Tlf: +34 968367590 - Fax: +34 968363389
>
> Este mensaje se envía firmado.
> Para verificar esta firma, descargue en su navegador
> el Certificado de la Universidad de Murcia:
> http://www.um.es/atica/ssl/PKI/modulo/modulo.html
>
>
-- -------------- -- ---- ---- --- - - - - - -- - - - - - - Tony Bourke tonyIZZATvegan.net____________________ The Load Balancing Mailing List Unsubscribe: mailto:majordomoIZZATvegan.net?body=unsubscribe%20lb-l Archive: http://vegan.net/lb/archive LBDigest: http://lbdigest.com MRTG with SLB: http://vegan.net/MRTG Hosted by: http://www.tokkisystems.com
This archive was generated by hypermail 2.1.4 : Fri Mar 21 2003 - 09:53:42 EST